CapSeal Bullet^® Capillary Ferrule, Short Design

ferrule type short

pkg of 50 ea

0.4 mm

0.10-0.25 mm Column I.D.

The CapSeal Bullet^® ferrule, with its innovative design, provides a refined graphite ferrule with a clean sharp profile, and minimal flashing to ensure maximum sealing surface and minimal possibility of column contamination during installation. The CapSeal Bullet^® ferrule allows low-torque sealing (effectiveat 1/8-turn past fingertight), and has a temperature limit of 450 ℃ for both isothermal and programmed temperature use, under normal conditions. Furthermore CapSeal Bullet^® ferrules to provide a leak-free connection for any application.
CapSeal Bullet™ 密封垫由限制在铝基座中的石墨材料构成。独特的设计使密封垫不会粘在紧固件上,易于移除。由此消除了密封垫粘滞以及损坏紧固件的问题。

特性:手紧后再拧 1/8 圈进行密封。可重复使用。特殊的锥形末端可防止石墨进入紧固件。

材料组成:位于铝基座中的石墨

最高温度:450℃

CapSeal Bullet is a registered trademark of sigma-aldrich Co. LLC